What Is a Clone Kit?
A clone kit is a DIY sex toy kit that lets you create a custom silicone replica of intimate body parts. The kits come with everything you need: non-toxic alginate molding powder, a plastic tube, mixing tools, thermometer, and 100% medical-grade platinum-cure silicone. The most popular version is Clone-A-Willy, which creates a realistic penis replica. There's also Clone-A-Pussy for those who want to cast a vulva.
Many kits include a vibrating unit, so the finished toy isn't just decorative — it's fully functional, with multiple vibration speeds.
Step-by-Step Guide: How to Use a DIY Clone Kit
Step 1: Prepare Your Space & Trim the Tube
Mark the plastic tube about an inch above where the erect penis tip will reach. Trim at that mark. A clean workspace makes the process easier — lay down a towel and have all supplies within reach.
Step 2: Measure and Heat the Water
Pour water into a measuring cup and use the included thermometer to confirm it's at 32°C (90°F). This temperature is critical — too hot or too cold and the alginate won't set correctly.
Step 3: Mix the Alginate
Pour the alginate powder into a bowl, then slowly add the warm water while stirring continuously for about 45 seconds. The mixture should be smooth and thick — like a loose pudding.
Step 4: Pour and Insert
Quickly pour the alginate into the tube. Insert the fully erect penis immediately. Stay still and remain erect for about 2 minutes.
Step 5: Remove and Let the Mold Cure
After 2 minutes, carefully remove. Let the alginate mold cure fully — most Clone-A-Willy Canada kits recommend 4–8 hours.
Step 6: Mix and Pour the Silicone
Combine equal parts of the two-part silicone following the kit instructions. Stir continuously with the paddle, then pour into the alginate mold. If your kit includes a vibrator, insert it now before the silicone sets.
Step 7: Cure for 24 Hours
Smooth the top of the silicone with a gloved finger and let it cure at room temperature for a full 24 hours. Once set, remove the mold, trim any excess silicone, and wash thoroughly before use.
Clone Kit Variations at XOXTOYS Canada
- Clone-A-Willy Vibrating Kit — The classic kit with a built-in vibrating motor. Available in multiple colors including neon pink, purple, blue, and flesh tone.
- Clone-A-Willy Glow in the Dark — Uses non-toxic glow powder mixed into the silicone.
- Clone-A-Pussy Kit — Creates a detailed replica of a vulva.
- Empire Labs Vibrating Clone-A-Willy — A premium vibrating version with a high-powered motor pre-included in the kit.
All kits use 100% platinum-cure, medical-grade silicone — non-porous, hypoallergenic, body-safe, and built to last.
→ Browse Clone-A-Willy Canada Kits at XOXTOYS
Tips for the Best Results
- Work fast when pouring alginate — it sets quickly once mixed.
- Have a partner assist to maintain arousal and stillness during the 2-minute wait.
- Room temperature matters: colder rooms slow curing. Aim for 20–25°C.
- Don't rush the silicone cure. A full 24 hours at room temperature gives the best result.
Cleaning & Care
Wash with mild soap and warm water before and after every use. You can also boil it for 3–5 minutes for full sterilization (remove the vibrator first). Store in a clean, dry place.
Final Thoughts
Clone-A-Willy kits are one of the most unique and personal gift ideas in the adult toy world. Shop Clone-A-Willy Canada at XOXTOYS.ca with discreet packaging and fast nationwide delivery.
